Installing a Pool in 2024 – The Ultimate Guide & Tips

Not only are the swimming pools perfect for cooling yourself down during hot summer days but, they can also offer you a wide range of health benefits too. Installing a pool in your yard is a complex process, and if you were planning on installing one in your yard, you will need to start planning everything as soon as possible, even though summer is several months away.

As previously mentioned, installing a pool is not an easy task, and once you see what you will need to do, you might feel a little bit overwhelmed and confused. Luckily for you, this article will cover almost everything you should know about the entire process. Let’s take a closer look:

Page Contents

First Things: Choose What Type You Want And Get The Plans

Nothing can be built with an architectural plan and design, so before you do anything else, this is what you should think about. Hence, before looking at the entire process, here are the designs you can opt for:

  1. A Traditional Design – traditional designs are pools that have either a circular, rectangular, or square shape. Of course, these are the most common ones people choose to add to their yards, however, there are other types people choose as well.
  2. A Modern And Weird Twist – if you are looking for something that is a bit more fun, you can opt for having a True-L or Lazy-L design, as well as a freeform or kidney-shaped pool. One of the most interesting things about these types is that you can easily fit it into your landscape and home design.

Choose The Right Company

It is highly possible that you do not have the necessary machines or knowledge to construct an entire pool by yourself, hence, you will need to find a company that will do the work for you. Fortunately, there are various companies that you can choose from, but, keep in mind that it needs to be a reputable and highly-praised company. You do not want to hire a company that does not know what they are doing.

Obtain The Permits From Your Local Government

You cannot simply wake up one day and decide that you will start digging a hole for a swimming pool. For this, you will need to obtain a permit that you can get from your local government. Now, you should know that the regulations and laws are different in every state, so, do some homework on what you might need.

Clear Your Yard, Mark The Location Where The Pool Will Be, And Then Dig

When you obtain the permit, the next step will be clearing the area of any trees, bushes, shrubs, or flower beds that might be in the way. The workers will then proceed by marking the location where the pool should be, and then they will start digging a hole for it.

Now, back to the plan and architectural design. The workers will need to carefully study it in order to avoid any gas, electricity, or water lines. Do not be afraid or worried if the shape seems somewhat weird and irregular. This needs to happen in order for the pool to fit well. This is why most of the construction companies leave a few inches here and there.

The Installation Process

As previously mentioned, you can opt from a traditional or modern design. Let’s go through the installation process for both options:

The Concrete Option

Installing a concrete pool is more time-consuming and difficult than installing a fiberglass one. The first thing the workers will do is to level the floor surface, especially since it will be rugged from the digging. Once they are done with that, they will start building the walls. To create the wall frames, the construction company will use wooden and metal bars.

Next, they will proceed by adding the plumbing units to the site and they will also ensure that everything is fixated properly. If not, you will have costly and terrible problems later on. Plumbing is the most important part of this installation process, hence, ensure that they double, if not triple-check everything.

In order for the pumps, lights, and filtration systems to work, the company will install an electrical system. This needs to be done correctly and precisely – and you can only imagine what could happen if it is not installed properly. The next step will be filling the walls with concrete.

The final step will be adding vinyl liners to the ground and interior of the pool. Of course, you can opt for other materials, but this is the most common one used for concrete pools. Once everything is done, you can test everything and you should be good to go!

The Fiberglass Option

When the hole is dug, the employees will set a base where the mold will go. The floor needs to be laid down which can be a bed of sand or a thicker layer of gravel. Keep in mind that the gravel should not be too high since it will also affect the height of the pool. The process continues by fitting the mold into the hole by using a crane.

Do not think that there is a problem if the workers lift and re-set the mold a few times since this needs to be done to see if everything is leveled properly. The plumbing should already be done around the mold before it is placed in the hole. If you want to see what fiberglass pool designs you can opt for, click here for more information.


There you have it. As you can see, installing a concrete or fiberglass pool is not easy. However, with the help of a reliable and qualified construction company, you should not have any problems or hindrances along the installation process. So, now that you know what you will need for constructing a swimming pool in your yard, do not waste any more time and start thinking about how your pool will look like.